Added a LUNA2000 module and now get version mismatch alarms (3049/3050/3051). How do I clear them?

The short answer

Upgrade the power control module firmware from the installer account and wait for the alarm to clear.

Plain explanation

From the Huawei manual for the LUNA2000-S0 battery: Open FusionSolar with the installer account. Upgrade the power control module firmware. The rest of the checklist is below; work through it in order. Installer only: DC and AC work on a live PV system is dangerous, so owners should note the code and call their installer.

Steps from the source

Open FusionSolar with the installer account
Upgrade the power control module firmware
Wait for the upgrade to finish and the alarm to clear
Repeated failure → dealer

Source

Huawei LUNA2000-(5-30)-S0 User Manual V17 (2024-05-30), EDOC1100167258, §8.3 Table 8-2 (printed p118+) – distributor mirror, Alarms 3049–3051, Table 8-2ske-solar.com ↗

Where installers ask this

General guidance based on the manufacturer's manual or the named source. Always follow the current manual for your exact model and your national code. DC and AC electrical work is for qualified installers only. Not affiliated with or endorsed by any brand named; trademarks belong to their owners.