Real solar questions. Plain answers. Real sources.
92 questions installers really ask on forums and on site: error codes, insulation faults, batteries, grid trips, string design. Each one answered in plain English from the manual or standard, with the source linked.
Real question. Checked source. Plain answer.
Every question here was asked by real people on public forums such as Reddit r/solar and r/SolarDIY. Every answer comes from the manufacturer's manual, a standard or published research.
Found where installers ask
We collect the questions that keep coming up in installer threads and link the thread we found it in.
Checked against the source
We read the manual, standard or study that settles it. If something is not fully confirmed, the answer is marked.
Plain answer, source linked
A one-line verdict, a short explanation and the steps, with the document named and linked. Local rules? Check your national code.
10 topics, 92 answers
Insulation faults, grid trips, battery comms, meters, backup, firmware and string design.
Answers installers ask for most
Huawei SUN2000 throws alarm 2062 Low Insulation Resistance every morning or after rain. Where do I start?
Treat it as a real insulation fault: check PE first, then test the PV array (and battery rack) to ground.
Source: Huawei Inverter Alarm Reference (EDOC1100345192)
Read the answer →Module has one brand of MC4-type connector, my extension cable has another. Can I plug them together?
No. Mated PV connectors should be the same type from the same manufacturer; 'MC4 compatible' is not a certification.
Source: Stäubli Electrical Connectors: "Why preventing cross-mating is critical for PV connector s
BYD HVS/HVM connected but the inverter won't charge or discharge it. What do I check?
Check BYD's Compatible Inverter List and inverter config, app config and firmware, terminal resistor position and PIN.
Source: BYD Battery-Box Premium HVS & HVM Service Guideline and Checklist for BCU-V2.0
Cold sunny morning and the inverter trips on PV overvoltage. How many modules can I really put in one string?
Design the string on its coldest-day open-circuit voltage, not the label value: it must stay below the inverter's maximum DC input voltage.
Source: Huawei Inverter Alarm Reference
New answers, as we post them.
The newest Question Solar posts from LinkedIn. One question, one plain answer, one source.
Post titles and dates come from our own server. “Show post” or “Load LinkedIn posts” loads LinkedIn’s embed; LinkedIn may then set cookies under its own privacy policy.
Can you beat P-Man's score?
P-Man Loads the Container: chomp the modules, dodge the rain and answer solar quiz questions to power up. Free, in your browser, no sign-up.
Stuck on a job? Ask us.
Email your question and we will find the source that answers it. Good questions are added here, without your name unless you say yes.
Email your question → or write to sales@pvdis.com- 1What you see on site: the error code, symptom or readings
- 2Inverter, battery or module type
- 3Country and grid code
- 4A photo or two
Question Solar is run by PVDIS, a B2B solar module distributor. Need modules for your next project? Talk to the PVDIS team.
Visit pvdis.com ↗